BD-S2800-24E

BSR2800-24E:  Routeur modulaire, multi-service:

1 console port, 1 USB2.0 port, 2 GE combo ports, 4 GE-TX ports, 24 FE-LAN ports; 1 built-in encryption engine; 1 HIC and 1 built-in 3G slot; 2 HIC slots.

BSR2800-20:  modularized multi-service router (1 console port, 2 GE combo ports, 4 GE-LAN ports; 1 built-in encryption engine; 2 HIC slots)

Product Description

Standard configuraton:

1 console port,  1 USB2.0 port,  2 GE combo ports,  4 GE-TX ports,  4 FE-LAN ports; 1 built-in encryption engine; 1 HIC and 1 built-in 3G slot; 2 HIC slots.

BD-S2800-24E series is the next-generation multiservice switching router platform .

The router platform is of high performance by integrating a 64-bit multi-core processor, a gigabit switching chip and FPGA into one solution.

BDS2800-24E builds a real multiservice broadband platform by providing rich software functions such as routing, switching, safety and VPN.

With its strong processing and expansion capability, rich software functions and hardware modules,  this router meets requirements of the government, financial institutions, the defense system, operators and enterprises in network construction.

High Performance

BD-S2800-24E is driven by the 64-bit dual-core processor with specialized gigabit ASIC switching chip and FPGA components, which enables the whole hardware platform to run on the high-speed Ethernet frame. The innovative design endows BSR with a super processing capability, providing a guarantee for upper-layer software functions.

Strong Expansibility

With the switching core, BD-S2800-24E can expand its external interface, slot and module without subjecting to the total CPU resource. The switching chip provides sufficient internal channels of high-bandwidth for the  equipment, so BD-S2800-24Es expansibility has far surpassed that of the traditional modularized router.

Energy-saving Advantage

BD-S2800-24E series adopt the new-generation hardware chip in consideration of energy saving while guaranteeing its strong processing capacity. Compared with the mainstream devices in the industry, power consumption of the router is reduced by 15% to 20%, which both reduces the device maintenance cost and accords with the low-carbon idea. BD-S2800-24E is also equipped with the environment friendly maglev mute fan.

Varied Protocols

BD-S2800-24E  supports Layer 2 link protocols including HDLC, PPP, static routers; policy routers; and dynamic routers such as RIP, OSPF, BGP. These routing protocols are well compatible with the devices manufactured by the mainstream vendors in the industry. Besides, BD-S2800-24E supports integration of multiple services such as routing, switching, voice, safety and wireless, which meets the requirement of complicated network construction.

New Services

BD-S2800-24E supports the MPLS characteristics and the MPLS-based layer-2/layer-3 VPN technology, which realize the transparent Ethernet transmission service and the flexible enterprise interconnection. BD-S2800-24E supports IPv6 data forwarding, routing protocols and multicast routing protocols; BD-S2800-24E also supports the IPv4/IPv6 protocol stack and the interconnection technology, which makes the existing networks smoothly upgrade to IPv6.

Secure Service Access

BD-S2800-24E supports selective ACL firewall filtration technology, NAT, VPNs such as IPSec/L2TP/PPTP/GRE, and security technologies such as AAA, Radius, PAP/CHAP.

Traffic Management Policy

BD-S2800-24E supports varied queues including FIFO, PQ, CQ, CBWFQ, LLQ, WFQ, DSCP, IP Precedence and CAR.

BD-S2800-24E support its self-developed traffic control and service management policy (GBSC), which can better real-time arrange and monitor your data traffic.

Flexible Management and Maintenance

BD-S2800-24E series is convenient in managing and monitoring the network by using the in-band and out-band management tools such as Console, Telnet, SSH and SNMP; BD-S2800-24E  English interface.

                                     Model                                                    BD-S2800-24E

Chassis

Console 1
USB2.0 1
GE-­Combo 2
GE-TX 4
FE-LAN 24

Expansibility

HIC 1
Encryption engine built-in
WiFi /
3G HIC, onboard
Encryption Optional

Performance/

Capacity

PPS 1Mpps
BootROM 512K
Flash 32MB
SDRAM 512MB

Peripherals

Fan Fanless
Voltage 100~240VAC power supply,  -36~-72VDC power supply (optional)
Power ≤30W
Dimensions mm (W×D×H) 19-inch, 1U

Temperature/

Humidity

Operating 0℃-40℃; 10%-85% non-condensation
Storage -20℃-65℃; 5%-95% non-condensation

Link interconnection

LAN ARP, ARP proxy, Gratuitous ARP
WAN PPP, Multilink-PPP, PPPoE (Client/Serv)
HDLC

VPN

Unicast static route, direct route, default route
RIPv1/v2, OSPFv2, BGPv4
PBR
FastSwitch, Load-Balance
Multicast IGMP
PIM-DM, PIM-SM
IP ICMP, TCP, UDP
NAT, PAT, Port-MAP, Private-Service, ALG
Ping, TraceRoute, Nslookup
IP ACL, IMP filter, Fast-Access
DHCP Client/Serv/Relay
DNS, DNS host, DNS Proxy, DDNS (PeanutHull/DynDNS/CTC)
Helper-Address, UDP Helper
IP unnumber, DDR
Keepalive, PDP (compatible with CISCO)
NetFlow, IP Accounting
TFTP Client/Serv, FTP Client
SNTP, job/schedule
PNP
ALIAS
reverse telnet, VTY
MPLS MP-BGP, VRF
L2VPN, L3VPN
IPv6 IPv6 ND, IPv6 PMTU, IPv6 FIB, IPv6 ACL, IPv6 (approved by IPv6 PhaseII)
IPv6 QoS
IPv6 transition: NAT-PT, IPv6 tunnel, 4over6
IPv6 tunnel: IPSec v6, GRE, 6to4, ISATAP
IPv6 route: IPv6 static route, RIPng, OSPFv3, BGP4+

Reliability

Backup function Interface backup
Floating route backup
E-Backup, Keepalive Ethernet remote monitoring
VRRP
bandwidth based load sharing and backup
traffic based load balancing and backup
BFD BFD for RIP, OSPF, BGP, MPLS and VRRP

QoS

Congestion management FIFO, PQ, CQ, WFQ, CBWFQ
Congestion avoidance WRED/RED
Traffic shaping GTS (Generic Traffic Shaping)
Others GBSC, Layer7filter
Traffic classification ACL
IP Precedence
DSCP
MAC
802.1P
Switching function(for   BD-S2800-24E Switching 802.1p CoS, 802.1Q VLAN, 802.1x
STP, RSTP
Keepalive, port mirror, broadcast/multicast storm control

Network safety

AAA Authentication, Authorization, Accouting
enable, local, Radius, Tacacs+
PAP, CHAP, MS-CHAP
Firewall ACL, NAT
ASPF state detection
SYN flood, UDP flood or ICMP flood
ARP attack protection, ARP-SCAN
Prevention of Ping of Death, Tear-drop, Land-Based, WinNuke, PingSweep, ARP attack and IP-Spoofing
VPN IKE, IPSec, EZVPN
L2TP, PPTP, GRE
VPN nesting

3G wireless

Type WCDMA, CDMA2000, TD-SCDMA

Management and maintenance

Network management SNMP, MIB, SYSLOG, RMON, HTTP management
Local management CLI management and file system management
Log-on Console/Telnet/VTY/SSH log-on mode

 

Ordering Information

BD-S2800-24E   chassis
     BD-S2800*-24E Modularized multi-service router TS-S2800-24E (1 CON, 1 USB2.0, 2 GE-Combo, 4 GE-TX Ethernet ports, 24 FE-LANs; built-in encryption engine;  1 HIC and built-in 3G slots)
HIC modules
    HIC-1GE-TX 1-port 10/100/1000M Base-T electric interface card(RJ45)
   HIC-1GE-TX/SFP 1-port 10/100/1000M TX/SFP combo interface card(RJ45/SFP)
  HIC-2GE- TX+SFP 2-port 100/1000Me Ethernet interface card(RJ45+SFP)
  HIC-1E1B 1-port unchannelized E1-F interface card
  HIC-2E1B 2-port unchannelized E1-F interface card
  HIC-1T1 1-port T1 card
  HIC-2T1 2-port T1 card
  HIC-1TB 1-port synchronous serial interface card (V28/V35)
  HIC-2TB 2-port synchronous serial interface card (V28/V35)
  HIC-8ASY 8-port asynchronous serial interface card
  HIC-3G-WCDMA WCDMA mode 3G card, Unicom only
  HIC-3G-CDMA2000 CDMA2000 mode 3G card, telecom only
  HIC-3G-TDSCDMA TD-SCDMA mode 3G card, CMCC only
  HIC-4G-TDD TD-LTE mode 4G card, CMCC only