Fusionneuse 31S

Fusionneuse 31S à alignement coeur-à-cœur.

Catégorie :

Product Description

The Fujikura 31S is a fully ruggedized, active cladding alignment fusion splicer. The two camera, active cladding alignment system provides consistent splicing performance in the most challenging conditions. A 6-second splice time and 25-second shrink time offers unmatched speed and productivity, while an easy-to-use touchscreen monitor provides simple and intuitive menu navigation. Interchangeable sheath clamps or fiber holders provide versatility for user preference, and compatibility with fusion-installable connectors.The extended-life battery is rated for up to 200 splice and heat cycles. Long-life electrodes,lasting 5,000 splices, help minimize downtime for replacement and stabilization. The large 5" monitor provides a crystal clear image, even in the brightest sunlight. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available.Backed by the best service team in the industry, the Fujikura 31S is the ideal splicer to use when portability, ruggedness, and reliability are needed for your splicing application

  • Two camera, active cladding alignment
  • 5" touchscreen monitor
  • Interchangeable sheath clamps and fiber holders
  • Fully ruggedized for shock, moisture and dust resistance
  • Extended-life electrodes, 5,000 splices, exchangeable without tools
  • Long-life battery (200 splices/shrinks per charge)
  • PARAMETER

    VALUE

    Model

    31S Splicer

    Applicable Fibers

    Single-mode (G.652 & G.657), Multimode (G.651), DSF (G.653), NZDS (G.655)

    Cladding Diameter

    125 μm

    Coating Diameter

    250 μm up to 3 mm

    Fiber Cleave Length

    5 mm to 16 mm

    Typical Average Splice Loss

    0.03 dB (SM), 0.01 dB (MM), 0.05 dB (DS) and 0.05 dB (NZDS)

    Splicing Time

    Typical 6 sec with SM

    Arc Calibration Method

    Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available

    Splicing Modes

    Total 100 splice modes

    Splice Loss Estimate

    Based on two camera, active cladding alignment data

    Storage of Splice Result

    10,000 splice results

    Fiber Display

    5 inch TFT color LCD with X or Y view or both X and Y view simultaneously

    Magnification

    200X for single-camera view and 132X magnification for dual-camera view

    Viewing Method

    2 axis CMOS camera

    Operating Condition

    Altitude: 0 to 5,000 m above sea level, -10° to +50° C, Humidity: 0 to 95% RH, non-dew

    Mechanical Proof Test

    1.96 N

    Tube Heater

    30 heating modes

    Tube Heating Time

    Typical 25 sec with FP-60 (60 mm) sleeve

    Protection Sleeve Length

    60 mm, 40 mm, micro

    Splice/Heat Cycles with Battery

    Typical 200 cycles with BTR-11A

    Electrode Life

    5,000 splices

    Power Supply

    Auto select from 100 V to 240 V with AC adapter, 14.8 V DC with installed battery

    Terminals

    USB 2.0

    Wind Protection

    Maximum wind velocity of 15 m/s. (34 mph)

    Dimensions

    131 x 201 x 79 (mm)

    Weight

    1,300 g (2.85 lbs) with battery