Heater 100w-tsf – Résistance Chauffant

Resistance pour coffret exterieur, avec protection au contact.

Utilisé afin d’éviter la condensation d’humidité dans les coffrets quand la temperature baisse.

Doit être utilisée avec thermostat chaud pour regler la temperature de demarrage.

Product Description

Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and hygrostats can directly be connected to the heater Heater 100w-TSF. This heater is also available in a version with plug-in thermostat requiring no additional wiring. The heaters are designed for permanent operation. Available capacity is 100W.
  • Low surface temperature
  • Quick mounting due to clip fixing
  • Double insulated (plastic)
  • Wide voltage range
  • Small size
Model Haeter 100w-tsf
Capacity 100w
Operating voltage 120 – 240V AC/DC¹ (min. 110V, max. 265V)
Heating element PTC resistor – temperature limiting
Surface temperature < +80°C (+176°F), except upper protective grille
Connection 4-pole terminal 2.5mm², torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Note other voltages on request