No products in the cart.
Product Description
Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and hygrostats can directly be connected to the heater Heater 100w-TSF. This heater is also available in a version with plug-in thermostat requiring no additional wiring. The heaters are designed for permanent operation. Available capacity is 100W.
- Low surface temperature
- Quick mounting due to clip fixing
- Double insulated (plastic)
- Wide voltage range
- Small size
| Model | Haeter 100w-tsf |
| Capacity | 100w |
| Operating voltage | 120 – 240V AC/DC¹ (min. 110V, max. 265V) |
| Heating element | PTC resistor – temperature limiting |
| Surface temperature | < +80°C (+176°F), except upper protective grille |
| Connection | 4-pole terminal 2.5mm², torque 0.8Nm max. |
| Casing | plastic according to UL94 V-0, black |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Fitting position | vertical airflow (air outlet up, connection on bottom) |
| Operating/Storage temperature | -45 to +70°C (-49 to +158°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type/Protection class | IP20 / II (double insulated) |
| Note | other voltages on request |
