TS-UPS120-48

Alimentation 48V 120W avec support batterie de secours

Description du produit

Model TS-UPS120-48
OUTPUT DC voltage CH1:54.4V CH2:54.4V
Voltage tolerance ±1%
Rated current 2A 0.15A
Current range 0~2.15
Rated power 116.9W
Ripple&noise 180mvp-p
DCvoltage ADJ.range CH1:48~56V
INPUT Voltage range 85~132VAC/170~264VAC selected by switch 47~63Hz
frequency 47~63HZ
AC current 2.8A/115VAC,1.4A/230VAC
efficiency 83%
Inrush current Cold start current 30A/115VAC,50A/230VAC
Leakage current < 1mA/240VAC
PROTECTION Over load Rated output power110%~150% start over load protection
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Battery protection 43~46V  ( use 4x12VDC batteries)
At low voltage protection type: shut off
FUNCTION UPS introduction long-term online floating charge to battery,high charging efficiency,battery can saturate to more than 90% ,cauto-stop harging when it’s full,prevent over charging. Effectively extend battery life,AC/battery auto switch,no switch time,no need human guard.
cold-start ,when there is no AC input ,can use battery start UPS,Meet the user’s emergency needs
ENVIRONMENT Working temp, humidity -10°C~+60°C,20%~90%RH
Storagetemp,humidity -20°C~+85°C,10%~95%RH non-condensing
Withstand vibration 10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes
SAFETY Withstand voltage I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolated resistance I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC
OTHERS Dimension 159*97*38mm(L*W*H) 30pcs/Carton ( common packing )
Weight/packing 0.56kg/45pcs/26kg/0.041m =>3;/1.45CUFT
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25°Cof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.

Téléchargement:

Fiche Technique: PDF