Product Description
TSM-60-1001 is a new generation, enhanced SDH / MSTP device. It is a carrier-class, high compact platform and aimed for metro and SDH networks access. It can work as Add-Drop Multiplexer (ADM),Termination Multiplexer (TM), and also as a Gigabit Ethernet to SDH converter.
TSM-60-1001 with extremely strong cross-connection ability, it supports 64K up to low / high order of SDH cross-connection. Not only the STM-1 / STM-4 optical port can work as the network uplink, it can also configure the n x E1 ports as the network uplink simultaneously. The co-working optic and E1 network uplinks provides customer a very flexibly networking configuration.
Any combination of AC, DC dual power is supported, and equipped on a 1U height, 19 inches width rack mountable casing. Such powerful cross connect switch, flexible networking, link protection and redundancy power supply, various voice / data services which make TSM-60-1001 the most function rich, reliable and cost effective solution for seamlessly migration of the E1 TDM network onto the SDH network.
- E1 Interface
50ppm±Bit
rate: 2048Kbps
Code type: HDB3 code, G.703 standard
(optional)W
(default) or 120WInput impedance: 75
Frame structure: G.704, G.706
Compression law: to G.711
Level : ±2.37V ±10%ETH Interface
(10/100/1000M)
Interface rate: 10/100/1000Mbps, auto
Standard: IEEE 802.3, IEEE 802.1Q (VLAN)
Connector: RJ45Order Wire Phone
Use standard 2-wire phone set
Channel: 1
Coding: PCM
Bandwidth: 64Kbps
Connector: RJ11Mechanical Dimension
Dimension: 440mm (W) x 250mm (D) x 44mm (H)
Net weight: 4KgPower Supply
Input voltage: -48Vdc and/or 220Vac
Voltage range: -36Vdc ~ -81 Vdc, 165Vac~265Vac
Power consumption: <10WOperation Environment
Working temperature: -10°C ~ 50°C
Working humidity: <=90 % (no condensed)
Ø 19” rack mountable, 1U height compact size;
Ø System supports point-to-point, chain and ring network
applications
Ø Gigabit Ethernet to STM-1 conversion, data rate up to 63 x
VC12
Ø STM1 / STM-4 and n x E1 co-working simultaneously as
network
uplinks;
Ø System supports 2 x STM-1, or 2 x STM-4 optical ports as ring
protection
Ø Ethernet supports 4 x GE electrical ports or 3 x GE electrical
ports plus 1 x GE optical port
Ø Order-wire channel for point-to-point and point-to-multipoint
voice communication
Ø Sophisticate configurable system protection with SNCP
network
protection and 1+1 interface protection;
Ø In-band management channel for remote control and system
management
Ø Two expansion slots for E1 or various data or voice modules
Ø Alarm relay is provided for external alarm facility connection;
Ø Remote firmware and software upgrade is available;
Ø Redundancy power supply is supported with any combination of the power
supply unit.
SDH multiplixer PDF