SDH multiplexer TSM-60-1001

Mutliplexeur  SDH / MSTP compact 1U 19″,  intègre toute sorte de plateforme de transport, supporte tous les types d’équipements digitals ,comme  digital cross connect (DXC), IPPBX, voice/data drop/insert services all-in-one.

Le systeme supporte les toplogies  point-à-point, chaîne ou bien boucle réseau.

avec une  variété de modules et fonctionalités

Description du produit

TSM-60-1001 is a new generation, enhanced SDH / MSTP device.    It is a carrier-class, high compact platform and aimed for metro and SDH networks access. It can work as Add-Drop Multiplexer (ADM),Termination   Multiplexer (TM), and also as a Gigabit Ethernet to SDH converter.

TSM-60-1001 with extremely strong cross-connection ability, it supports 64K up to low / high order of SDH cross-connection. Not only the STM-1 / STM-4 optical port can work as the network uplink,  it can also configure the n x E1 ports as the network uplink simultaneously. The co-working optic and E1 network uplinks provides customer a very flexibly networking configuration.
Any combination of AC, DC dual power is supported, and equipped on a 1U height, 19 inches width rack mountable casing. Such powerful cross connect switch, flexible networking, link protection and redundancy power supply, various voice / data services which make TSM-60-1001 the most function rich, reliable and cost effective solution for seamlessly migration of the E1 TDM network onto the SDH network.

  •  E1 Interface


    50ppm
    ±Bit
    rate: 2048Kbps
    Code type: HDB3 code, G.703 standard
    (optional)
    W
    (default) or 120
    WInput impedance: 75
    Frame structure: G.704, G.706
    Compression law: to G.711
    Level :
    ±2.37V ±10%

     

    ETH Interface
    (10/100/1000M)

    Interface rate: 10/100/1000Mbps, auto
    Standard: IEEE 802.3, IEEE 802.1Q (VLAN)
    Connector: RJ45

    Order Wire Phone
    Use standard 2-wire phone set
    Channel: 1
    Coding: PCM
    Bandwidth: 64Kbps
    Connector: RJ11

    Mechanical Dimension
    Dimension: 440mm (W) x 250mm (D) x 44mm (H)
    Net weight: 4Kg

    Power Supply
    Input voltage: -48Vdc and/or 220Vac
    Voltage range: -36Vdc ~ -81 Vdc, 165Vac~265Vac
    Power consumption: <10W

    Operation Environment
    Working temperature: -10°C ~ 50°C
    Working humidity: <=90 % (no condensed)

Ø 19” rack mountable, 1U height compact size;

Ø System supports point-to-point, chain and ring network

       applications

Ø Gigabit Ethernet to STM-1 conversion, data rate up to 63 x

       VC12

Ø STM1 / STM-4 and n x E1 co-working simultaneously as

network
uplinks;

Ø System supports 2 x STM-1, or 2 x STM-4 optical ports as ring


protection

Ø Ethernet supports 4 x GE electrical ports or 3 x GE electrical

ports plus 1 x GE optical port

Ø  Order-wire channel for point-to-point and point-to-multipoint
voice communication

Ø Sophisticate configurable system protection with SNCP

network
protection and 1+1 interface protection;

Ø In-band management channel for remote control and system

management

Ø Two expansion slots for E1 or various data or voice modules

Ø Alarm relay is provided for external alarm facility connection;

Ø Remote firmware and software upgrade is available;

Ø Redundancy power supply is supported with any combination of the power
supply unit.

SDH multiplixer PDF